DIN Connectors

DIN 43650 Electrical Connectors

Most IP65 rated industrial solenoid valves will either be supplied with or will require the appropriate solenoid valve electrical DIN connector to attach the cable to the coil circuit. Electrical DIN connectors come is a wide range of sizes with options for internal electrical circuits. Detailed below are more of the more common electrical DIN connectors found and used in the solenoid valve and automation industries.

Read more or buy DIN connectors here...

	Electrical DIN 43650A 28mm Square Connectors
	Basic 1 Piece Black No Circuit with PG9 for 6 to 8 mm cable entry NBR Seal IP65 rated, Max 16 Amp Resistance <4 mOhm Clamping contact Optional Conduit Entry, 5 – 6mm cable or 1/2NPT 1.5mm² Cable section max
	1 Piece Clear With LED (Red) with PG9 for 6 to 8 mm cable NBR Seal IP65 rated, Max 1.0 Amp, Resistance <4 mOhm Clamping Contact Power Consumption Max 5mA, Drop off delay approx 3mSec Wrong polarity protection Optional 24v or 110v or 250v, Yellow + Green LED, 5 – 6mm or 1/2NPT 1.0mm² Cable section max
	2 Piece Clear With LED (Red) + Varistor (VDR) with PG9 for 6 to 8 mm cable NBR Seal IP65 rated, Max 1.0 Amp, Resistance <4 mOhm Clamping Contact Power Consumption Max 5mA, Drop off delay approx 3mSec Wrong polarity protection Optional 24v or 110v or 250v, Yellow + Green LED, 5 – 6mm or 1/2NPT 1.0mm² Cable section max
	2 Piece Clear With rectifier + VDR with PG9 for 6 to 8 mm cable NBR Seal IP65 rated, Max 1.0 Amp, Resistance <4 mOhm Clamping Contact Power Consumption Max 5mA, Drop off delay approx 3mSec Wrong polarity protection Optional 24v or 110v or 250v, Yellow + Green LED, 5 – 6mm or 1/2NPT 1.0mm² Cable section max
DIN 43650A Configuration Options (earth terminal 12,6, 3 and at 9 O'Clock) Standard DIN 43650A Electrical connectors can be simply disassembled and rotated around 90 degree intervals to suit the connection and or available space. Helpful Hint - always try to have the cable entry in from the bottom to avoid moisture gravitating into the internal circuit or clamping contacts.
	Electrical DIN 43650B 28.5 x 22mm Wide Connectors
	Basic 1 Piece Black No Circuit with PG9 for 6 to 8 mm cable entry NBR Seal IP65 rated, Max 16 Amp Resistance <4 mOhm Clamping contact Optional Conduit Entry, 5 – 6mm cable or 1/2NPT 1.5mm² Cable section max
	1 Piece Clear With LED (Red) with PG9 for 6 to 8 mm cable NBR Seal IP65 rated, Max 1.0 Amp, Resistance <4 mOhm Clamping Contact Power Consumption Max 5mA, Drop off delay approx 3mSec Wrong polarity protection Optional 24v or 110v or 250v, Yellow + Green LED, 5 – 6mm or 1/2NPT 1.0mm² Cable section max
	2 Piece Clear With LED (Red) + Varistor (VDR) with PG9 for 6 to 8 mm cable NBR Seal IP65 rated, Max 1.0 Amp, Resistance <4 mOhm Clamping Contact Power Consumption Max 5mA, Drop off delay approx 3mSec Wrong polarity protection Optional 24v or 110v or 250v, Yellow + Green LED, 5 – 6mm or 1/2NPT 1.0mm² Cable section max
Pre Wired Electrical DIN Connectors. There are also a full range of standard and special application pre-wired (already with cable) electrical DIN connectors with a wide range of cable types, sizes, lengths and end terminations to suit customer requirements.
Standard Industrial Electrical DIN Connector Sizes